It must be acknowledged that your lawn suffers from enormous stress throughout the seasons. Additionally, your regular foot traffic does not really benefit your grass. Thus, the beauty of your lawn tends to dull quickly, and you will need to consider renovating it. How can you achieve this? This article presents you with the 5 steps to renovate your lawn.
First, clean the lawn
To renovate your lawn, you will start by cleaning it. For this purpose, you will mow the old lawn down to the ground using the mowers available at https://www.tondeuse-thermique.info/greencut-glm660sx/. The work should be done during a period when the sun is shining, and your soil should not be too wet or too dry. After mowing, you will use a tiller to uproot the remaining grass. From there, you can easily loosen the soil with your machine. Make two crossed passes while keeping your machine at a low speed so that the tines can extract the roots. This way, the grass on the surface will dry out under the sun’s action.
Further reading : The best revolutionary apps to enhance your communication
Level the soil
This involves removing clumps of grass with a rake or claw. You will then uproot the rooted plants. Put all of this in your wheelbarrow and now add your composter. Next, you will use a rake to remove everything that remains in the soil, such as stones, roots, and plant debris. With the rake, the soil will be well leveled, as it will eliminate any holes and bumps to better prepare the ground for the grass. You can use a lawn roller to achieve a well-compacted seedbed.
Now sow your seeds
Here, your grass will be chosen based on your region, the exposure of the lawn, and of course, the intended use. Be sure to mix the seeds you want to sow well so that your sowing is uniform. Make sure to scatter the seeds evenly on the ground, following a straight line and maintaining a consistent rhythm. If the wind picks up, wait for it to calm down first to avoid scattering your seeds. If you have a large area, divide it into several zones and you can work on each zone to ensure everything is uniform and harmonious.
Further reading : How to Increase the Power of Your 125cc Scooter?
Burying the seeds
You now need to bury your seeds properly in the soil. You can use your rake to cover them to a depth not exceeding 1 cm. Don’t forget to mix these seeds with potting soil during the burying process. Rake lightly back and forth to avoid displacing your seeds. This work should be done on dry soil so that the earth does not lose the seeds when you pass the roller to complete this step.
Now water
Once the work is done, you will now water your lawn in the evening when it hasn’t rained. When the burying is finished, the entire soil should be well soaked. But go with fine droplets to avoid displacing the seeds from the soil. Indeed, you should not create puddles. Finally, do not overdo the watering, but two waterings each day during this sunny period is more than sufficient. You will see the first seedlings after about a week.